Samsung washers show error codes as two letters, like LE, UE, or OE. This page lists every Samsung washer error code documented on DiagnosFix, each linking to a full breakdown of likely causes, first checks, and what to avoid. If you’d rather start from the symptom instead of the code, our washing machine troubleshooting hub covers issues beyond error codes, and how to reset a Samsung washer clears several of these codes with a simple power cycle, no repair needed.
A code varies by model: the same code can have a different meaning depending on the brand and model. Always check your appliance’s manual before acting.
All Samsung washer error codes
- 4E — Not filling with water fast enough. Full guide →
- 5C — Not draining; check the drain hose installation first. Full guide →
- DE — Washer doesn’t detect the door as closed and locked. Full guide →
- LE — Sensors detected moisture or a water level problem. Full guide →
- OE — Too much water in the washer. Full guide →
- SUD — Too many suds, a detergent issue rather than a mechanical fault. Full guide →
- UE — Unbalanced load; redistributing the laundry usually clears it. Full guide →
Don’t see your exact code?
Samsung has used slightly different code sets across washer generations, and some displays cycle between two codes. If the exact code you’re seeing isn’t listed above, check your owner’s manual for the model-specific list before assuming a part has failed.
The information provided here is a diagnostic aid and does not replace the intervention of a qualified professional.
