F6E4 is Whirlpool’s code for the overfill float switch tripping. The official fix doesn’t start with the switch itself: it starts with leveling. An unlevel dishwasher can actuate the float switch on its own, even when the switch is working fine. Level the unit front to back and side to side, then reset the control for 30 seconds and run a cycle to check that the code clears.
Brand: Whirlpool
Whirlpool Dishwasher Error Code F6E4
F6E4 means the overfill float switch has tripped. Whirlpool’s official fix starts with checking that the dishwasher is level, not with replacing the switch.
Meaning
Possible causes
No cause is certain until it has been checked on the appliance.
- Likely Dishwasher not level, actuating the overfill float switch
First checks
- Check that the dishwasher is level side to side and front to back. A phone's level app works well set against the tub rim or the top edge of the door.
- Adjust the leveling legs at the front (and rear, on models that have them) until level.
- Reset the control: unplug for 30 seconds, or switch off the breaker for 30 seconds on hard-wired units, then run a cycle.
What not to do
- Replacing the float switch before checking level. Whirlpool's own documentation treats leveling as the first fix for this code, not the switch.
An error code varies by brand
The same code can have a different meaning depending on the brand and model. Always check your appliance's manual before acting.
Related problems
- Low
Maytag Dishwasher Not Draining: Reset, Filter Location & Error Codes
Maytag has been built by Whirlpool since 2006 and shares the same twist-out filter and kickplate pump design. Filter cleaning is still…
- Low
Frigidaire Dishwasher Not Draining: Reset, Filter Location & Error Codes
Most Frigidaire dishwashers use a self-cleaning macerating system with no manual filter, so a drain problem usually points to the pump, hose,…
- Low
KitchenAid Dishwasher Not Draining: Reset, Filter Location & Error Codes
KitchenAid dishwashers share Whirlpool's platform, same twist-out filter and kickplate pump access, but parts sold under the KitchenAid name often cost more…
Related guides
When to call a professional
If the simple checks didn’t solve it, if the fix involves electrical wiring, gas, or the refrigerant circuit, or if you have any doubt at all: stop there and hand the appliance to a qualified repair professional.