On Samsung ovens, the first thing worth ruling out isn’t a part at all: Sabbath Mode. It’s a legitimate accessibility feature that deliberately disables heating controls, and it stays active through a power outage, so an oven that “stopped heating” right after the power blinked is often just still in that mode.
Take a look at our Oven Not Heating guide first if you haven’t, it lays out every general cause in the order to check them. Everything from this point on is about Samsung specifically. You’ll also find this page listed under our broader oven troubleshooting hub.
Checking and Disabling Sabbath Mode
The exit sequence depends on your model. On many touch-panel models, press and hold Bake and Up (or the equivalent buttons) together for about 3 seconds until “SAb” clears from the display. If the panel doesn’t respond, unplug the oven for 60 seconds to reset the control board, then try again.
Reset and Error Codes
If Sabbath Mode isn’t the issue, a power-cycle is the next step: unplug the oven or cut power at the breaker for a minute. Watch for an error code on restart. Samsung’s codes on ovens usually point to a sensor, communication fault, or the control board rather than a part you can diagnose visually. Photograph the code and your exact model number, then search Samsung’s support site for that specific combination, since meanings vary by model line.
When It’s a Hardware Fault
Once Sabbath Mode and a reset are ruled out, the underlying cause is the same as most brands: a failed bake element on electric models, or an igniter on gas models. See our general Oven Not Heating guide for the diagnostic order.
Frequently Asked Questions
My oven stopped heating right after a power outage, is that a coincidence?
Possibly not. Samsung ovens stay in Sabbath Mode through a power outage if it was already enabled, and Sabbath Mode blocks normal heating controls. Check for it before assuming a part failed.
How do I get my Samsung oven out of Sabbath Mode?
Hold Bake and Up together for about 3 seconds until "SAb" disappears from the display on most touch-panel models. If that doesn't work, unplug the oven for 60 seconds to reset the control board and try again.
What should I do with a Samsung oven error code?
Photograph it along with your exact model number, and search Samsung's support site for that specific code. Codes on Samsung ovens generally point to sensor or board faults rather than something you'd diagnose with a multimeter at home.
This page is intended to help you narrow down the cause, not to stand in for a licensed technician’s diagnosis.
