Symptômes : Not Heating
-
Whirlpool Microwave Not Heating? The Exact Demo Mode Combo
Whirlpool’s demo mode has a specific keypad sequence to turn it off, hold « 3 » for 5 seconds with the door open, that’s easy to trigger by accident too.
-
LG Microwave Not Heating? Child Lock, Sensor Cook & Component Checks
LG’s own support material starts with Child Lock and Sensor Cook settings before component checks, a different order than most brands.
-
Samsung Microwave Not Heating? The Demo Mode Timer Test
Samsung’s own troubleshooting includes a specific test: if the countdown timer runs faster than it should, the microwave is in Demo mode, not actually broken.
-
GE Microwave Not Heating? Why GE Skips DIY Advice on This One
GE’s own support material offers no repair steps beyond two checks, tied to the same capacitor shock hazard behind most microwave repairs.
-
Samsung Oven Not Heating: Sabbath Mode, Reset & Error Codes
Before checking any part, rule out Sabbath Mode. It’s designed to keep the oven from heating and is easy to leave on by accident, even through a power outage.
-
GE Oven Not Heating: Igniter, Bake Element & Diagnostics
GE’s electric ovens often still turn on but stall around 100°F when the bake element fails; gas models point to a weak igniter first.
-
Whirlpool Oven Not Heating: Igniter, Bake Element & Control Board
On Whirlpool ovens, a weak igniter or a burned-out bake element cause most no-heat complaints, well ahead of the control board.
-
Oven Not Heating? 6 Causes Ranked by Likelihood (With Tests)
On gas ovens, a weak igniter is the most common cause. On electric ovens, it’s usually the bake element. Check yours before assuming the control board has failed.
-
Maytag Dryer Not Heating: Thermal Fuse, Element Location & Diagnostics
Maytag dryers share their platform and most parts with Whirlpool, including the thermal fuse location on the blower housing. Test it before the heating element.
-
LG Dryer Not Heating: Reset, Element Location & Error Codes
LG dryers often flag a clogged vent directly with a dedicated code before the heating element is even the likely cause. Check that code first.