All problems
Chaque fiche hiérarchise les causes probables et indique clairement quand il faut s’arrêter.
Examples: not draining E15 leak not heating
-
LG Dryer Not Heating: Reset, Element Location & Error Codes
LG dryers often flag a clogged vent directly with a dedicated code before the heating element is even the likely cause. Check that code first.
-
Samsung Dryer Not Heating: Reset, Sensor Location & Error Codes
Samsung dryers commonly flag heat problems with a tE or AE code tied to the temperature sensor, not always the heating element itself.
-
GE Dryer Not Heating: Element Location, Reset & Diagnostics
GE dryers use both a thermal fuse and a separate high-limit thermostat as heat safety cutoffs. Either one tripping shuts off heat without stopping the tumble cycle.
-
Whirlpool Dryer Not Heating: Thermal Fuse, Element Location & Error Codes
On most Whirlpool dryers, the thermal fuse sits on the blower housing or exhaust duct at the back. It’s the first thing to test, well before the heating element.
-
Dryer Takes Too Long to Dry? 6 Causes Ranked by Likelihood
A dryer that eventually finishes but takes far longer than it used to is almost always a restricted-airflow problem, not a broken part.
-
Dryer Not Spinning? 6 Causes Ranked by Likelihood (With Tests)
If you can hear the motor running but the drum won’t turn, a snapped drive belt is the most likely cause, not a failed motor.
-
Dryer Squeaking? 6 Causes Ranked by Likelihood (With Tests)
A rhythmic squeak that speeds up with the drum almost always means worn drum support rollers or a glazed drive belt, both ordinary wear items.
-
Dryer Not Heating? 7 Causes Ranked by Likelihood (With Tests)
The most common cause is a blown thermal fuse, usually tripped by a clogged vent. Check airflow before assuming the heating element has failed.
-
LG Washing Machine Not Draining: Reset, Filter Location & Error Codes
LG front-load washers have a pump filter behind a small hinged door at the bottom front, very similar to Samsung’s layout. The widely documented OE error code generally points to a drain fault.
