F13 has two possible meanings on Whirlpool washers: a dispenser drawer problem, or a door lock fault. Which one applies depends on the exact model.
Brand: Whirlpool
Whirlpool Washer Error Code F13 (Dispenser or Door Lock)
F13 points to the detergent dispenser on most models, sometimes the door lock depending on the exact washer.
Meaning
Possible causes
No cause is certain until it has been checked on the appliance.
- Likely Dispenser drawer scaled up or not fully pushed in
- Possible Water distribution nozzle clogged
- Possible Door lock fault depending on model
First checks
- Remove and clean the dispenser drawer and its housing.
- Confirm the drawer is pushed in all the way.
- If the code persists, check the door lock (look up your exact model number).
What not to do
- Forcing the dispenser drawer open or shut.
An error code varies by brand
The same code can have a different meaning depending on the brand and model. Always check your appliance's manual before acting.
Related problems
- Low
Washing Machine Won’t Start? 6 Causes Ranked by Likelihood (With Tests)
Most washers that won't start have a door that isn't fully closed, a tripped breaker, or an engaged control lock, rarely a…
- Low
Washing Machine Stuck on Spin Cycle? 6 Causes Ranked by Likelihood
A washer stuck on spin is usually re-attempting because of an unbalanced load or an unconfirmed lid/door switch, rarely a failed motor.
- Low
LG Washing Machine Not Draining: Reset, Filter Location & Error Codes
LG front-load washers have a pump filter behind a small hinged door at the bottom front, very similar to Samsung's layout. The…
Related guides
When to call a professional
If the simple checks didn’t solve it, if the fix involves electrical wiring, gas, or the refrigerant circuit, or if you have any doubt at all: stop there and hand the appliance to a qualified repair professional.