All problems
Each page ranks the probable causes and clearly states when to stop.
Exemples : ne vidange plus E15 fuite ne chauffe plus
-
Samsung Oven Not Heating: Sabbath Mode, Reset & Error Codes
Before checking any part, rule out Sabbath Mode. It’s designed to keep the oven from heating and is easy to leave on by accident, even through a power outage.
-
GE Oven Not Heating: Igniter, Bake Element & Diagnostics
GE’s electric ovens often still turn on but stall around 100°F when the bake element fails; gas models point to a weak igniter first.
-
Whirlpool Oven Not Heating: Igniter, Bake Element & Control Board
On Whirlpool ovens, a weak igniter or a burned-out bake element cause most no-heat complaints, well ahead of the control board.
-
Oven Not Heating? 6 Causes Ranked by Likelihood (With Tests)
On gas ovens, a weak igniter is the most common cause. On electric ovens, it’s usually the bake element. Check yours before assuming the control board has failed.
-
LG Refrigerator Not Cooling: Linear Compressor Failure & Error Codes
If both the fridge and freezer are warm, the fans run but you don’t hear compressor hum, and the display shows Er CO or a similar code, that’s almost always a failed linear compressor.
-
Samsung Refrigerator Not Cooling But Freezer Works: Twin Cooling & Common Fixes
Samsung’s Twin Cooling Plus system uses a separate evaporator and fan for the fridge side, which is why the freezer can stay cold while the fridge doesn’t.
-
Whirlpool Refrigerator Not Cooling: Demo Mode, Condenser Coils & Common Fixes
Before checking any part, confirm Showroom/Demo Mode isn’t switched on. It silently shuts off cooling on many Whirlpool models while the interior light keeps working.
-
LG Refrigerator Ice Maker Not Working: Reset, Test Mode & Temperature Checks
LG’s own support material starts with the power switch and freezer temperature, then the 30-second reset and test mode button. Here’s the order to check.
-
Samsung Refrigerator Ice Maker Not Working: Test Button, Water Pressure & Reset
Samsung’s own troubleshooting checks the Ice Off setting, water pressure, and whether the unit is level before anything else. Here’s the Test button reset.