An error code stuck on the display, or a washer that stops responding, can often be cleared with a simple electrical reset before you start suspecting a more serious fault.
How to Reset a Whirlpool 6th Sense Washer
Before assuming a real fault, a simple 10-minute unplug often clears a stuck error code.
Steps
- Turn the washer off and unplug it from the outlet.
- Wait at least 10 minutes to let the electronics fully reset.
- Plug the washer back in and run a short empty cycle to confirm the error code doesn't return.
- If the control panel stays locked, hold the power button down for several seconds until "res" (reset) appears on the display, depending on the model.
Warnings
- A code that returns identically after the reset points to a real fault: write down the exact code before calling a technician.
Maintenance tips
- After a reset, run an empty cycle at 140°F (60°C) before washing laundry again: this checks draining and spinning without risk.
Dans ce guide
In this guide
Sam Radford — DiagnosFix
Technical reviewer
Before you start
Unplug the appliance, shut off the water supply if relevant, and stop immediately if you smell burning. If in doubt, call a qualified professional.