FP appears when water fails to drain properly at the end of the cycle. It’s one of the most common codes, and in most cases the cause is easy to fix yourself.
Brand: Whirlpool
Whirlpool Washer Error Code FP (Drain Fault)
FP (sometimes shown as F03) means water isn’t draining. A clogged drain filter is by far the most common cause.
Meaning
Possible causes
No cause is certain until it has been checked on the appliance.
- Likely Drain filter clogged with lint or a small object
- Possible Drain hose kinked or blocked
- Possible Drain pump jammed or failed
First checks
- Shut off water and power before doing anything.
- Open the drain filter door at the bottom front and clean it, with a pan ready for residual water.
- Check that the drain hose isn't kinked or blocked.
What not to do
- Running cycles repeatedly without first draining and cleaning the filter.
An error code varies by brand
The same code can have a different meaning depending on the brand and model. Always check your appliance's manual before acting.
Related problems
- Low
Washing Machine Won’t Start? 6 Causes Ranked by Likelihood (With Tests)
Most washers that won't start have a door that isn't fully closed, a tripped breaker, or an engaged control lock, rarely a…
- Low
Washing Machine Stuck on Spin Cycle? 6 Causes Ranked by Likelihood
A washer stuck on spin is usually re-attempting because of an unbalanced load or an unconfirmed lid/door switch, rarely a failed motor.
- Low
LG Washing Machine Not Draining: Reset, Filter Location & Error Codes
LG front-load washers have a pump filter behind a small hinged door at the bottom front, very similar to Samsung's layout. The…
Related guides
When to call a professional
If the simple checks didn’t solve it, if the fix involves electrical wiring, gas, or the refrigerant circuit, or if you have any doubt at all: stop there and hand the appliance to a qualified repair professional.