Toutes les pannes
Chaque fiche hiérarchise les causes probables et indique clairement quand il faut s’arrêter.
Exemples : ne vidange plus E15 fuite ne chauffe plus
-
Garbage Disposal Humming But Not Working? 5 Causes Ranked by Likelihood
A hum with no grinding almost always means the motor is running but the flywheel is physically jammed by something, not that the motor has failed.
-
Garbage Disposal Not Working? 6 Causes Ranked by Likelihood (With Tests)
The most common cause is a tripped reset button or a tripped GFCI outlet under the sink. Check both before assuming the motor has failed.
-
Maytag Dryer Not Heating: Thermal Fuse, Element Location & Diagnostics
Maytag dryers share their platform and most parts with Whirlpool, including the thermal fuse location on the blower housing. Test it before the heating element.
-
LG Dryer Not Heating: Reset, Element Location & Error Codes
LG dryers often flag a clogged vent directly with a dedicated code before the heating element is even the likely cause. Check that code first.
-
Samsung Dryer Not Heating: Reset, Sensor Location & Error Codes
Samsung dryers commonly flag heat problems with a tE or AE code tied to the temperature sensor, not always the heating element itself.
-
GE Dryer Not Heating: Element Location, Reset & Diagnostics
GE dryers use both a thermal fuse and a separate high-limit thermostat as heat safety cutoffs. Either one tripping shuts off heat without stopping the tumble cycle.
-
Whirlpool Dryer Not Heating: Thermal Fuse, Element Location & Error Codes
On most Whirlpool dryers, the thermal fuse sits on the blower housing or exhaust duct at the back. It’s the first thing to test, well before the heating element.
-
Dryer Takes Too Long to Dry? 6 Causes Ranked by Likelihood
A dryer that eventually finishes but takes far longer than it used to is almost always a restricted-airflow problem, not a broken part.
-
Dryer Not Spinning? 6 Causes Ranked by Likelihood (With Tests)
If you can hear the motor running but the drum won’t turn, a snapped drive belt is the most likely cause, not a failed motor.
